How do you remove the rear brake hubs on a 1989 Toyota Dyna 200 ?

I've changed the drum brakes on the front, the hub just comes off after removing wheels and 2 screws. The rear drum brakes have reached maximum adjustment and now are starting to jam on. I couldn't find a workshop manual for this vehicle and I don't want to start smacking it with the hammer and break something (probably my finger). The wheels are removed, the 6 retaining nuts are removed, do I need to use a puller or twist the bit in the centre? This is a single wheel set up, not dual wheels. Any mechanical advice much appreciated, Cheers Stu.
How do you remove the rear brake hubs on a 1989 Toyota Dyna 200 ?
sounds like you may have to hammer side to side and pry side to side a little at a time, I've been there many times.

Unless there is a way to access the adjuster gear from the back...some vehicles have a rubber thing that can be removed, just don't turn it tighter.
How do you remove the rear brake hubs on a 1989 Toyota Dyna 200 ?
Gonk or STP Injector cleaner %26quot;1 bottle to 3/4 tank of gas%26quot; or at a good station they have Pressurized cans of Injector cleaner they will use to clean the System faster.

web hosting problem

drawing a circle